[. . . ] Notice for customers: the following information is only applicable to equipment sold in countries applying EU Directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. the Authorized Representative for EMC and product safety is Sony Deutschland GmbH , Hedelfinger Strasse 61 , 70327 Stuttgart , Germany. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. [. . . ] Depending on the search item you select, only Jump mode may be available. Alphabet search may take some time, depending on the amount of tracks. If the track being searched is transferred by "Content Transfer, " the most melodic or rhythmical sections of tracks are played (page 13). Dynamic Color Illuminator allows you to change the color of the display and buttons on the main unit to match the car's interior. You can select from 12 preset colors, customized color and 5 preset patterns. Rotate the control dial until "BASE COLOR" appears, then press it. when you select "BASE COLOR , " customized color is overwritten. Rotate the control dial to select from "RGB RED, " "RGB GREEN, " or "RGB BLUE, " then press it. Note If the control dial is rotated rapidly, the color of the display and the buttons may change too quickly. Changing DAY/NIGHT color mode You can set a different color for DAY/ NIGHT depending on the DIMMER setting. OFF or AUTO (turn off the head light*2) ON or AUTO (turn on the head light*2) *2 Available only when the illumination control lead is connected. The color of the display and buttons on the main unit changes according to the SensMeTM channel. You can display the menu more clearly (White) without concern for color setting. Rotate the control dial until "WHITE MENU" appears, then press it. Rotate the control dial until "SENSME COLR" appears, then press it. When you push on, the color of display and the buttons on the main unit turns white once, and then the color changes to the customized color. Rotate the control dial until "START WHITE" appears, then press it. When you select a preset pattern or play tracks in the SensMeTM channel, sound synchronization becomes effective. Rotate the control dial until "SOUND SYNC" appears, then press it. Rotate the control dial until the desired menu item appears, then press it. ) AUX VOLUME*2 (AUX Volume level) Adjusts the volume level for each connected auxiliary equipment: "+18 dB" ­ "0 dB" ­ "­8 dB. " This setting negates the need to adjust the volume level between sources. [. . . ] ­ Connect a power antenna (aerial) control lead (blue) or accessory power supply lead (red) to the power supply lead of a car's antenna (aerial) booster (only when your car has built-in radio antenna (aerial) in the rear/side glass). ­ If the auto antenna (aerial) will not go up, check the connection of the power antenna (aerial) control lead. The station does not broadcast any traffic announcements despite being TP. "PI SEEK" appears and the unit starts searching for another frequency with the same PI (Program Identification) data. [. . . ]